WisyCom MTK952 User Manual download pdf (Page 25)

MPR30-IEM User Manual

Rev. 06



Instruction to connect MPR30 using USB cable:

In order to use the micro USB port to configure the

MPR30, it is necessary to install the MPR30 USB

driver (see How to install MPR30 USB driver)

1. Connect the MPR30 to the PC through the

micro USB interface using the USB cable

2. Check if the version of ENG RX Manager

installed in your PC is the latest version. If

not, uninstall the ENG RX Manager actives

in your PC and install the new version

3. Run ENG RX Manager

4. Power up the receiver MPR30

5. Push Disconnected button. On the Device

connection windows select USB port

and verify that a COMx is selected on

the Virtual COM panel. If COMx is not

showed, push Refresh button and/or

try to disconnect and reconnect the

USB cable connected to the MPR30.

Then click OK.

6. If the connection is ended

well, the Connected icon

is showed on the top of



displayed on

the information panel

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

WisyCom MTK952 User Manual Page 25